Magazine Accessories

Warne Handgun Magazine Extensions are available in both increased capacity models, and zero capacity models for 10 round capacity limits. These extensions feature an ergonomic shape that allows for better insertion, and finger grooves, allowing the...

The Shield Arms PMAG +5 Extension adds 5 rounds to your Magpul PMAG magazine. Their unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the extension from the magazine body. Comes with a...

Strike Industries Mag Extension, Extended Aluminum Mag Plate, Si-emp-al-g19-fdeProduct Type: Mag ExtensionDescription: Extended Aluminum Mag Plate

When installed on the base of a submachine-gun magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy...

The 43-10 is a magazine floor-plate replacement for the Glock 43 that adds 4 rounds for a total of 10 rounds in a magazine. Special ergonomic design enables secure manipulation of the magazine and a full grip on the weapon when the magazine is in use...

These units replace the magazine base plate and internal floor plate. They will add two rounds to the Glock M26" one round to the Glock M27 and M33 and no rounds to the Glock M39. These units will add 5/8" additional length for better control and comfort...

When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation...

Safariland injection molded speed loaders are designed to meet the needs of revolver shooters and they feature simple push-loading operation which combines maximum speed with ease of use.Features :Injection MoldedFaster ReloadingPush Button Operation

Pearce Grip Grip Extension, Plus 1, Fits Springfield Xds/xde/xds Mod 2, Black Pg-xds+Model: Grip ExtProduct Type: Magazine Base Plate

The Strike Industries Extended Magazine Plate For GLOCK G17 9MM / G22 .40CAL was designed to provide smoother magazine reloading through a slow drag / no snag design while maintaining maximum magazine capacity with any OEM GLOCK magazine. The Extended...

The KRISS MagEx2 Kit is the ultimate capacity extending base plate for your factory standard Glock magazines, Gen 3 and later. The KRISS MagEx2 Kit is made up of the extended baseplate, outer sleeve, and extended spring, constructed of durable and...

Warne Handgun Magazine Extensions are available in both increased capacity models, and zero capacity models for 10 round capacity limits. These extensions feature an ergonomic shape that allows for better insertion, and finger grooves, allowing the...

Safariland injection molded speed loaders are designed to meet the needs of revolver shooters and they feature simple push-loading operation which combines maximum speed with ease of use.Features :Injection MoldedFaster ReloadingPush Button Operation

The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of a the magazine, the PMAG Ranger Plate...

Since 2001" Maglula has manufactured professional military-grade tools for loading and unloading magazines. These products save valuable time at the range, field, armory and prevent pain associated with loading and unloading magazines.Features :Takes...

This Magazine loader is perfect for your next day at the range. Quickly and easily load all of your magazines without the hassle of conventional magazine loading. This magazine loader is capable of loading your magazines in under 10 seconds! Load your...

Wilson Combat Remington 870 2-shot Extension 12ga, Extension Tube Sget-u-2Model: Remington 870 2-Shot Extension 12GaProduct Type: Mag ExtensionDescription: Extension Tube

With one slight twist, the HKS Speed loader instantly loads cartridges into your revolver. Strong metal points hold cartridges securely in the loader until they are released into the revolver with a turn of the knob.Features :Securely Holds Cartridges...

These units replace the magazine base plate and internal floor plate. They will add two rounds to the Glock M26" one round to the Glock M27 and M33 and no rounds to the Glock M39. These units will add 5/8" additional length for better control and comfort...

The PMAG Minus 5 Round Limiter installs in 10" 20" or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by five rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent...

The Magpul Ranger Plate is a floorplate replacement for current issue aluminum USGI 30-round magazines that incorporates an integral loop, floorplate lock, and mag identifier. When installed on the base of a magazine, the Ranger Plate provides...

With one slight twist, the HKS Speed loader instantly loads cartridges into your revolver. Strong metal points hold cartridges securely in the loader until they are released into the revolver with a turn of the knob.Features :Securely Holds Cartridges...

These extensions replace the magazine base plate and retain all other factory components. They do not alter the capacity of the magazine. These units will add 1" additional length resulting in better control and comfort.Features :High Impact...

Since 2001" Maglula has manufactured professional military-grade tools for loading and unloading magazines. These products save valuable time at the range, field, armory and prevent pain associated with loading and unloading magazines.Features :Takes...

Safariland injection molded speed loaders are designed to meet the needs of revolver shooters and they feature simple push-loading operation which combines maximum speed with ease of use.Features :Injection MoldedFaster ReloadingPush Button Operation

The TZ-2 is a durable & light-weight polymer magazine coupler, made for secure magazine operation and rapid magazine changes.Features :Facilitates swift magazine changeDurable and lightweightQuick & Easy installation

Pachmayrs new Grip Extenders will greatly increase your control and shooting comfort when added to popular compact and sub-compact handguns. The extensions perfectly match the shape and texture of the handgun, so they look like they are part of the...

Increase the capacity of your standard Remington 870 shotgun with their DIY +2 kit. XS Sights extension kit is built to be easily installable, lightweight, and offer additional tactical upgrades to your taste. The kit includes their detent tool to...

The Phase 5 Low Drag, High Visibility 12 Gauge Shotgun Follower (12GSF) is designed to feed smoothly with no binding in most factory 12-gauge magazine and extension tubes. The 12GSF is precision machined from solid 7075-T6 aluminum bar-stock in the U.S.A...

This unit replaces the magazine base plate on the SIG P365 (12 round magazines). This extension does not alter the capacity of the magazine. It adds approximately 1/4" inch additional gripping surface and acts to enhance the overall ergonomics of the...

This unit replaces the magazine base plate on the M&P 9 SHIELD PLUS. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface and incorporates a texture pattern similar to the frame. FOR 10...

Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Fits 9mm"and 40SW only. For use on XDM models with a rounded internal locking feature. This unit will not work on XDM models with a slotted (square)...

Bianchi Speed Strips are a compact loading device for revolvers. Made from a flexible urethane material, these strips securely hold 6 rounds of revolver ammunition and conveniently load two rounds at a time. Speed Strips fit in most single mag/knife...

This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine.Features :High Impact PolymerIncreased Comfort and ControlAdded Gripping Surface

An extension for the GLOCK 26 & 27 Gen 4 & 5. This extension replaces the magazine floor plate adding approximately 5/8" additional length resulting in better control and comfort without altering the capacity of the factory magazine. This extension...

These units replace the original base plate and internal locking plate. They do not alter the capacity of the magazine. These extensions will add approximately 1/2" additional length.Features :High Impact PolymerIncreased Comfort and ControlAdded...

The Shield Arms Glock 19/23 Magazine Extension adds 5 rounds to your Glock 19 magazine, and 4 rounds to your Glock 23 magazine. Their unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the...

The ASAP Universal Double Stack Magazine Loader works with a large majority of double stack magazines in calibers 380 ACP - 45 ACP. Fill magazines with one action - push the mag loader down, insert the round below the feed lips, and raise the loader up...

This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine. Fits the Para Ordnance P10" Warthawg, Nitehawg and Hawg 9. Will not work on the Slim...

These units replace the magazine base plate and provide better comfort by adding approximately 1/2 inch of gripping surface. They do not alter the capacity of the magazine. NOTE: This extension will not fit the Millennium Pro or Generation 2...

The AR-15/M4/M16 Speed Loader works with metal and polymer magazines. Magazines will securely lock into Speed Loader with the integrated magazine catch. Speed Loader works with GI 10 round stripper clips or you can load 10 loose rounds into the side tray...

The Shield Arms PMAG +5 Extension adds 5 rounds to your Magpul PMAG magazine. Our unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the extension from the magazine body. Comes with a 100%...

Bianchi Speed Strips are a compact loading device for revolvers. Made from a flexible urethane material, these strips securely hold 6 rounds of revolver ammunition and conveniently load two rounds at a time. Speed Strips fit in most single mag/knife...

This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine.Features :High Impact PolymerIncreased Comfort and ControlGrip Extension

The Shield Arms Springfield Echelon Magazine Extension adds 5 rounds to your Springfield Echelon magazine. The unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the extension from the...

Three spare clips for the 1088" 1008" and T4 series of pistols. Holds BBs or Pellets.Features :Rotary .177 CalHolds BBs or Pellets,Fits Crosman 1088" 1008" and T4"8-Shot

The Shield Arms Glock 19/23 Magazine Extension adds 5 rounds to your Glock 19 magazine, and 4 rounds to your Glock 23 magazine. Their unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the...

The Shield Arms Springfield Echelon Magazine Extension adds 5 rounds to your Springfield Echelon magazine. The unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the extension from the...

Shield Arms S15 Base Plate, +0, Black S15-alu-bas-blkModel: S15 Base PlateProduct Type: Magazine Base Plate

The AK Speed Loader Version 2 is designed for AK 7.62X39mm type magazines. The AK Speed Loader will load magazines with AK 10 round stripper clips (NcSTAR AAKC AK stripper clips) or you can load up to 10 individual 7.62X39mm cartridges at a time onto the...

This extension replaces the magazine floor plate adding approximately 3/4" additional length and incorporates the factory checkering pattern resulting in better control and comfort without altering the capacity of the factory magazine.Features :High...

The Phase 5 Low Drag, High Visibility 12 Gauge Shotgun Follower (12GSF) is designed to feed smoothly with no binding in most factory 12-gauge magazine and extension tubes. The 12GSF is precision machined from solid 7075-T6 aluminum bar-stock in the U.S.A...

The Shield Arms Glock 19/23 Magazine Extension adds 5 rounds to your Glock 19 magazine, and 4 rounds to your Glock 23 magazine. Their unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the...

Pearce Grip Grip Extension, +1 Magazine Extension, Fits Springfield Xdm Elite Compact 45acp/10mm, Matte Finish, Black Pg-me10+Model: Grip ExtProduct Type: Mag ExtensionDescription: +1

The Shield Arms Glock 19/23 Magazine Extension adds 5 rounds to your Glock 19 magazine, and 4 rounds to your Glock 23 magazine. Their unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the...

Aluminum +0 replacement base plate for the S15 magazine. Shield Armss aluminum base plate features a more aggressive design with three cut outs for improved grip - one on either side, and one on the front. The bottom of the base plate features a bigger...

These units replace the magazine floor plate and internal floor plate on the 9mm (13 round only) and 40 S&W. They will add approximately 1" inch in length and additional capacity.(2 rounds to 9mm and 1 round to the 40 cal.)Features :High Impact...

Pachmayr Mag Sleeves adapt full-size magazines for use with compact handguns in many popular models. Mag Sleeves allow you greater shooting capability by increasing the guns grip size and capacity with additional rounds. Carry your compact pistol with a...

The Shield Arms S15 Magazine Extension adds 2 rounds to your S15 magazine. Shield Arms unique, easy access floor plate design allows you to quickly access the spring and follower without having to remove the extension from the magazine body.Features...

Used in conjunction with the 12 gauge extension tube nut, this tube kit will add one round to your existing magazine capacity.Features :Extension TubeIntegral CapFull-Length SpringAnodized 6061 Aluminum

Maximize the versatility and utility of your Nordic Components barrel clamp with this Picatinny rail attachment. This rail features enough real estate for mounting lights and other accessories, but takes up no more space than the width of the clamp...

The Taran Tactical Innovations GLOCK base pad is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.Features :Billet AluminumPush Pin Design Locks Base Pad to...

High quality components and precise manufacturing make Ghost parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on. For Glock...

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap and is required for installation of the extension tube kit.Features :Benelli Nova/SupernovaBeretta 1301...

Adds two rounds to your GLOCK 43 and uses the existing base plate. Features a stainless steel magazine spring.Features :Adds two roundsStainless steel magazine springUses existing base plate

This magazine extension allows for a more secure and comfortable grip, giving you better accuracy all while adding an extra 2 rounds to your Glock 43 6 round magazines.Features :Weight: 1.210 ozMaterial: 6061-T6 AluminumFinish: Black AnodizedFor Glock 43

The Beretta 92C XGRIP slides over the 15 or 17-round magazine. No tools are required. Once installed, the XGRIP provides superior grip, handling and control. For use in the 92 compact pistol.Features :Improved Comfort, Control, and AccuracyIncreased...

Reloading magazines takes a lot of cheer out of a day of shooting fun. With the ADCO Super Thumb Loader, you should be in good shape but you might need to bring a little extra ammo so you dont run out.Features :Accepts Most Single-Stack MagazinesEasier &...

The XGRIP XGSWMP adapts the full-size M&P 9/40 magazines for use in the compact pistol, incorporating the larger magazine into the compacts grip and increasing the capacity.Features :Improved Comfort, Control, and AccuracyIncreased CapacitySecure Fit

Reloading magazines takes a lot of cheer out of a day of shooting fun. With the ADCO Super Thumb Loader, you should be in good shape but you might need to bring a little extra ammo so you dont run out.Features :Accepts Most .380 Single-Stack...

Reloading magazines takes a lot of cheer out of a day of shooting fun. With the ADCO Super Thumb Loader, you should be in good shape but you might need to bring a little extra ammo so you dont run out.Features :Accepts Most Wide Body Double-Stack...

Reloading magazines takes a lot of cheer out of a day of shooting fun. With the ADCO Super Thumb Loader, you should be in good shape but you might need to bring a little extra ammo so you dont run out.Features :Accepts Extended Capacity Ruger 10/22...

This is the Glock OEM Speed Loader for the 9MM Slim (G43 ONLY).Features :Polymer ConstructionDurable & LightweightGlock OEM Quality

High quality components and precise manufacturing make XGrip parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features :Precise...

High quality components and precise manufacturing make Taran Tactical parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features...

Warne Handgun Magazine Extensions are available in both increased capacity models, and zero capacity models for 10 round capacity limits. These extensions feature an ergonomic shape that allows for better insertion, and finger grooves, allowing the...

The XGBRPX4SC XGRIP adapts the full size Beretta PX4 magazines for use in the sub compact PX4SC pistol, incorporating the larger magazine into the sub compacts grip, increasing the capacity and grip area.Features :Improved Comfort, Control, and...

Made of the same bomb-proof polymer found in all VT Floor Plates. Fits Glock Model 42.Features :Extended Front StrapGlass-Filled PolymerSuperior Impact Resistance

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap and is required for installation of the extension tube kit.Features :Mossberg...

The MagPump Pro Speedloader takes the best of the standard MagPump and improves upon it. Like its counterparts, this hopper-fed, loose-ammo loader eliminates hand fatigue and reduces magazine loading time by more than 50 percent. Simply load your ammo in...

This XGRIP adapts the Model PPKS magazine for use in the PPKs more compact grip and increases the guns capacity to 7 rounds.Features :Improved Comfort, Control, and AccuracyIncreased CapacitySecure Fit

Nordic Components anodized aluminum low-drag shotgun follower. Red anodization increases shotgun follower visibility for additional safety while checking magazine for ammunition.Features :Anodized Aluminum Construction for Durability and LongevityReduces...

This XGRIP adapts the full size SIG P320/250 magazine for use in the P320/250C pistols, incorporating the larger magazine into the compact pistols grip and increasing the guns capacity.Features :Improved Comfort, Control, and AccuracyIncreased...

With the Sylvan Arms Speed Loader you can load your .223 and 5.56 magazines faster and easier with the Sylvan Arms AR Speed Loader. Made from a fiberglass polymer, they are built to last and small to transport.Features :Painless LoadingUniversal Fit for...

High quality components and precise manufacturing make XGrip parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features :Precise...

This XGRIP adapts the HK P30 high capacity magazine for use in the USP Compact, incorporating the larger magazine into the USPC grip and increasing the guns capacity to 15 rounds in 9mm and 13 rounds in 40 calFeatures :Improved Comfort, Control, and...

The Raptor is designed for use on virtually all types of pistols, single and double stack magazines, 9mm" .357 Sig, 10mm" .40 and .45ACP caliber, as well as 1911 handguns. Load every round quickly and painlessly, each and every time! The Raptors unique...

Nordic Components Clamp Gasket For Shotgun Barrel And Magazine Tube, Prevents Wear And Scuffing Of The Barrel, Prevents Damage By Over Tightening, Black Bcg-bcl-12Model: Clamp GasketProduct Type: Shotgun Magazine Tube Components

This XGRIP adapts the HK P30 high capacity magazine for use in the P2000SK" incorporating the larger magazine into the P2000SKs grip and increasing the guns capacity to 15 rounds in 9mm and 13 rounds in 40 cal.Features :Improved Comfort, Control, and...

The 1 piece XGRIP snaps over the 7 round metal floorplate. No tools are required. Once installed, the XGRIP protects the extended magazine and floorplate. Compatible with Colt MUSTANG or SIG SAUER P238 .380 cal 7 round metal floorplate magazines.Features...

The GG&G Mossberg 590 Magazine Extensions are easy to install as long as you have a working knowledge of how to break down your shotgun to perform maintenance procedures.Features :Perfect for Military, Law Enforcement and Home Defense useFits 12ga...

The Taran Tactical Innovations GLOCK base pad is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.Features :Billet AluminumPush Pin Design Locks Base Pad to...

The MXT extension nut allows for installation of a Nordic Components MXT 12ga shotgun extension tube kit. The nut replaces the factory magazine cap and is required for installation of the extension tube kit.Features :Remington 870/1100/11-87/V3Replaces...

The XGGL43-9 XGRIP adapts the ETS 9 round 9MM magazines for use in the G43 pistols, incorporating the larger magazine into the grip and increasing the guns capacity.Features :Improved Comfort, Control, and AccuracyIncreased CapacitySecure Fit

Mossberg 590A1 Shotgun Shooters want the best for their shotguns. The Standard Mossberg 590 follower does not offer the upgraded features tactical shooters are looking for. Its one of the first 590A1 6 shot and 9 shot shotgun components to be upgraded...

This XGRIP adapts the G20" or G21 full size magazine for use in the G29 or G30 pistols, incorporating the larger magazine into the grip and increasing the guns capacity.Features :Improved Comfort, Control, and AccuracyIncreased CapacitySecure Fit

This is a set of three Teflon-coated barrel seal O-rings. Fits the Model 1100 and 11-87 12 gauge shotguns.Features :Teflon Coated3-PackFactory Replacement Part

High quality components and precise manufacturing make Ghost parts ideal for maintaining and upgrading firearms. The durability, reliability and excellent build quality of these parts will ensure years of service you can count on.Features :Precise...

Make loading magazines quicker with Glocks OEM Speed Loader for the 9MM" 40S&W and 357 SIG.Features :Polymer ConstructionDurable & LightweightGlock OEM Quality