Rails, Rings, Mounts, Bases

Ruger Model Specific fit Sold in pairs, Maxima Ruger rings are packaged in model specific configurations tofit Ruger's proprietary dovetail Warne's Maxima Maxima rings are a solid steel, vertically split ring that handle even the most punishing recoil,...

Warne 1 inch CZ 550, QD, Med Matte Rings

Heavy duty reinforced polymer bridge mount allows easy mounting of optics to your handgun without modifying the host firearm. The Bridge Mount attaches to the pistol's accessory rail. With M1913 rails at both 12 and 6 o'clock, the user does not forfeit...

CZ Direct fit upgrade Designed to fit the 16mm 527 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Canik Optic Interface #2 Elite Combat/SFx - Fits: Trijicon RMR

This Rail cover manufactured by Blackhawk is designed to clip onto standard Picatinny spec rails to protect unused rail portions from damage in addition to shielding the operator from heat. This 2 Slot cover is perfect to cover exposed rails in...

Rail, 2 In, Poly, Keymod, Black, W/ Hardware

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture and front sight post. Fits Marlin 1895 Variants. Only for use with front sights that have 1.00'' between threaded front sight holes.

The included Remote Pressure Switch is designed to allow momentary operation when the light is mounted to the rifles. The remote switch replaces the standard switch with a 8'' cord and a 2'' long pressure-sensitive switch. Attachment is achieved by the...

New Hunter Series of Scope Rings, 1'' Scope Tube Diameter Ring.

RMR/SRO steel block mount for custom shaping.

Designed specifically for the Trijicon RMR. This lower 1/3 cowitness mount is perfect for mounting the RMR or SRO on any rifle platform with a Picatinny rail. The AC32062 provides a lower 1/3 cowitness with backup iron sights. This means that the RMR/SRO...

30mm ring with 1 inch inserts designed to be mounted on weaver/Picatinny rails.

Aimpoint Pro Off Set QD Riser

The included Remote Pressure Switch is designed to allow momentary operation when the light is mounted to the rifles. The remote switch replaces the standard switch with a 8'' cord and a 2'' long pressure-sensitive switch. Attachment is achieved by the...

Designed to mount an MRO at a 45 degree angle next to your primary optic which makes it ideal for close range shooting. The mount features the ability to attach to either the right or left side of the weapon. It also has return to Zero features in a low...

RMR Mount for 3x24 and 3x30 Compact ACOG with bosses, 3.5x35 LED ACOG, and ACOG models equipped with backup iron sight.

Capture your best shots at the range or in the field using the Action Camera Mount bracket with the versatile KPM mounting system for mounting onto KeyMod/ Picatinny/ M-LOK accessories and rails.

Off set mount for 1 inch tube accessories such as lights or lasers.

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Extremely smooth in operation with multifaceted adjustment nut to get the exact tension required by the operator.

RMR/SRO quick release mount

Two-piece 1913 Picatinny steel rail for Winchester Model 70.

This quick release flatop mount clamps onto 1913 Picatinny rails. Fits the 1.5x16S (M16 base), 1.5x24, 2x20, 3x24 and 3x30 ACOG models - Gen 2 only.

RMR/SRO mount for Einhak-SEM custom rifle.

The QR mounts allow you to remove and reattach your scope and return to within 1/2'' of the original point-of-impact. The patented lever mechanism, machined with precision tolerances, engages the steel base to the ring, pulling it down and forward and...

Picatinny/ MIL-STD1913 1'' Flashlight/ Laser Extended Ring Mount.

Battery cap and lanyard assembly for 1-6x24 VCOG.

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture and front sight post.

This caps and lanyard set for the ACOG is designed to fit those ACOG's that have an internal adjuster. This adjuster has a low profile and sits inside a brass setting. The dial is silver in color and is adjusted with the use of a tool.

Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a ''no fail'' shot that will save another human life. Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers...

MOUNT, ROMEO3 MAX AND XL, ABSOLUTE CO-WITNESS

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Extremely smooth in operation with multifaceted adjustment nut to get the exact tension required by the operator.

NEW and Improved Gen2 3/4'' Picatinny Rail Riser 5.2'' Length is Picatinny / MIL-STD 1913 Standard profile and is lighter than the previous generation.

2.3 in Picatinny Rail for M-LOK Handguards.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Mossberg 500/590 Shotgun Receiver Picatinny Rail Mount

Compatible with Aimpoint T1/T2 red dots and T1 interface clones below: Aimpoint T1/T2, H1/H2, Comp M5 Vortex Crossfire Primary Arms SLx Advanced Micro Dot Holosun HE403, HE503, HE515 Sig Sauer Romeo4 (Post 2016 Model), Romeo5

30mm scope ring with locking quick release mount.

Front sight screws for all Glock models.

New Tactical Series of Scope Rings, 30MM Scope Tube Diameter Ring with 1'' Scope Ring Inserts.

1 inch ring that mounts to dovetail rails

Light Weight and Low Profile KeyMod dual ring 30mm scope mount with 1'' inserts.

Sling swivel stud with backing hardware for the Lancer 5.56mm and 7.62mm handguards.

Designed to be a great addition to your flash light.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

3.1 in Picatinny Rail for M-LOK Handguards.

Ruger Model Specific fit Sold in pairs, Maxima Ruger rings are packaged in model specific configurations tofit Ruger's proprietary dovetail Warne's Maxima Maxima rings are a solid steel, vertically split ring that handle even the most punishing recoil,...

Count on 34mm low scope rings from Warne Scope Mounts to give you excellent sighting through a scope. Using a scope requires careful installation and sighting: The goal is to have the lines from the scope and barrel be as close and as parallel as...

Pistol Scope Rail, Black Poly, M

1 inch ring that mounts to weaver/Picatinny rails.

Shotgun Magazine Tube Extension Clamp which does not feature a side picatinny rail. This extension clamp is designed to work in conjunction with Lancer Shotgun Magazine tube extensions and it features a matte black finish.

100% Made in the U.S.A.

Warne 1 inch Tikka, QD, Med Matte Rings

100% Made in the U.S.A.

CZ Direct fit upgrade Designed to fit the 19mm 550/557 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

This steel shroud helps protect your ROMEOZero red dot sight from impact and abrasive damage.

Ambidextrous Picatinny attachment. Reversible light mount to ensure snug fit and modularity. Constructed of Hard Coat Anodized 6061 Aluminum.

Battery cap for AccuPower RS20/RS22/RS24/RS29 models.

The Steiner 772 is a device that allows binoculars with a 1/4-20 threaded tripod socket to be attached to a tripod. Features a video pin to register more securely with many popular tripod quick release plates.

Acting as an alternative to the Model 17S mount, the Steiner HT Mount, available here with the lever on the left side, features a throw lever-style quick release and is able to attach to Picatinny/Weaver rails. NSN #5855-01-614-32

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

For rock-steady viewing from your vehicle, use the window mount with nearly any spotting scope.

Two-piece 1913 Picatinny steel rail for Savage Accu Trigger.

RMR type optic base mount for Glock rear sight dovetails.

CZ Direct fit upgrade Designed to fit the 16mm 527 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

Precision machined for optimum performance and repeatability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Picatinny Adapter to Mepro QD adapter for red dot micro sight to rapidly switch your red-dot from your pistol to your conversion kit - on any other standard Picatinny rail.

New Hunter Series of Scope Rings, 30MM Scope Tube Diameter Ring with 1'' Scope Ring Inserts.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

GEN II 30mm cantilever scope mount with lightweight upper rings and 45 offset rail. Includes 1'' scope inserts.

NEW and Improved Gen2 3/4'' Picatinny Rail Riser 5.2'' Length is Picatinny / MIL-STD 1913 Standard profile and is lighter than the previous generation.

Key-Mod 1'' Flashlight/ Laser Extended Modular Ring Mount.

M-LOK 1'' Flashlight/ Laser Extended Modular Ring Mount.

Henry Accessory Rail - Pistol Caliber

Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the...

Rail mount for M4/M16/AR15 with flat top upper receivers. Side rails allows user to mount lights/ lasers or other accessories.

Tenebraex killFLASH anti-reflection device and Tenebraex flip cap set for 1-6x24 VCOG.

This quick release flatop mount clamps onto Weaver rails. Fits the 1.5x16S (M16 base), 1.5x24, 2x20, 3x24 and 3x30 ACOG models - Gen 2 only.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

30mm Flip to Side Quick Release Mount

Leupolds Carbon Fiber Tripods deliver maximum versatility and performance to hunters and shooters alike, with a rugged, lightweight design thats ready to go anywhere. The Mark 5 is built to mount to a rifle, and is perfect for competition shooters and...

Remington 870/1100/11-87 Barrel and Magazine Tube Micro-Dot and Rail Mount, for mounting Optics and Accessories to your shotgun.

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD...

The C&H Precision plates are precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping. Since all the mounting hardware is replaceable, if any mounting hardware is damaged, it...

100% Made in the U.S.A.

Rail Cover, Ladder, Low Profil

Carbon fiber construction makes this full-size tripod incredibly durable, yet lightweight at just 2.5 pounds. With a max height of 58.25 inches, it folds to just 22.75 inches. The pan/tilt head's smooth tracking is perfect scanning or following movement.

7mm riser plate with mount screws for EOTECH Gen 2 and Gen 3 magnifiers only. Does not fit Holographic Weapon Sights. This is a direct factory replacement accessory for G23 and G33 magnifier products.

New updated Gen2 Picatinny scope rail mount designed to fit onto most Marlin Lever action rifles and some Marlin semi-auto rifles. Mounts easily onto predrilled Marlin receivers and allows for the easy mounting of optics onto your rifle.

GEN 2 Picatinny Rail Mount for HK MP5/ CETME/ 90 Series of long guns.

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture and front sight post.

Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking. Rail measures 6.75'' long, weight 7.3 oz.

The C&H Precision plates are precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping. Since all the mounting hardware is replaceable, if any mounting hardware is damaged, it...

NcSTAR Low profile Micro Dot base mount for the Ruger MK2 pistol with factory predrilled receiver. The easiest method to adding a Micro Dot optic to your MK2 pistol. The Micro Dot base mounts in front of the ejection port and doesn't require the removal...

Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a ''no fail'' shot that will save another human life. Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers...

This picatinny rail accessory kit allows you to add Blackhawk CQC picatinny rail accessories (magazine pouch, light holders) to your CQC SERPA holster leg platform.