Midwest Industries

1.25'' Heavy Duty Sling Swivel. Manganese Phosphate Coated.

1.25'' Quick Detach Sling Swivel. Black Oxide Finish.

1/7 Twist, 4150 Chrome Moly. M4 feedramps. Carbine Length Direct Impingement Gas System. Combat Series M-LOK Handguard. MI Blast Can Installed.

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

MI FORGED UPPER RECEIVER: Forged from 7075 T6 aluminum Precisely machined to M16/M4 specs M4 feed ramps Hard-coat anodized mil 8625 type 3 class 2 finish .250 take down pins MI M16 bolt carrier...

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

100% Made in the U.S.A.

Midwest Industries proudly introduces the Combat Rail HD, our cutting-edge AR15 handguard that redefines durability and performance. Engineered for maximum rigidity and extreme use, this...

100% Made in the U.S.A.

A2 Sight Tool Wrench

Compatible with Aimpoint T1/T2 red dots and T1 interface clones below: Aimpoint T1/T2, H1/H2, Comp M5 Vortex Crossfire Primary Arms SLx Advanced Micro Dot Holosun HE403, HE503, HE515 Sig Sauer...

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Precision machined for optimum return to zero performance and reliability. Hard coat...

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Precision machined for optimum return to zero performance and reliability. Hard coat...

Easy drop-in design does not permanently alter the firearm. Constructed from 6061 aluminum. Hard Coat Anodized. 922R Compliant. Will not work on milled guns.

Easy drop-in design does not permanently alter the firearm. Constructed from 6061 aluminum. Hard Coat Anodized. 922R Compliant. Will not work on milled guns.

Easy drop-in design does not permanently alter the firearm. Constructed from 6061 aluminum. Hard Coat Anodized. 922R Compliant. Will not work on milled guns.

AK Flash Hider. 100% made in the U.S.A.

Will work with M92/M8S pistols. Does not include detent, spring and pin.

Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking. Rail measures 6.75'' long, weight 7.3 oz.

This muzzle device is expertly designed to direct muzzle blast forward, enhancing shooter comfort and safety. Constructed from durable 6061 aluminum with a steel endcap secured in place, it features...

This muzzle device is expertly designed to direct muzzle blast forward, enhancing shooter comfort and safety. Constructed from durable 6061 aluminum with a steel endcap secured in place, it features...

This muzzle device is expertly designed to direct muzzle blast forward, enhancing shooter comfort and safety. Constructed from durable 6061 aluminum with a steel endcap secured in place, it features...

Not compatible with other STAP models.

The MI-ALPHA-TB24MM is a dual-chamber muzzle brake engineered to significantly reduce muzzle climb, enhancing shooting stability and accuracy. Constructed from durable 416 stainless steel, it is...

The MI-ALPHA-TB24MM is a dual-chamber muzzle brake engineered to significantly reduce muzzle climb, enhancing shooting stability and accuracy. Constructed from durable 416 stainless steel, it is...

The MI-ALPHA-TB24MM is a dual-chamber muzzle brake engineered to significantly reduce muzzle climb, enhancing shooting stability and accuracy. Constructed from durable 416 stainless steel, it is...

The MI-ALPHA-TB24MM is a dual-chamber muzzle brake engineered to significantly reduce muzzle climb, enhancing shooting stability and accuracy. Constructed from durable 416 stainless steel, it is...

The MI-ALPHA-TB24MM is a dual-chamber muzzle brake engineered to significantly reduce muzzle climb, enhancing shooting stability and accuracy. Constructed from durable 416 stainless steel, it is...

The MI-ALPHA-TB24MM is a dual-chamber muzzle brake engineered to significantly reduce muzzle climb, enhancing shooting stability and accuracy. Constructed from durable 416 stainless steel, it is...

Includes new crush washer.

.410'' diameter hole. Includes new crush washer.

Monolithic type continuous top rail. MIL-STD 1913 top rail. Constructed from 6061 aluminum hard coat anodized.

Monolithic type continuous top rail. MIL-STD 1913 top rail. Constructed from 6061 aluminum hard coat anodized.

Interior parts are S7 tool steel with heavy-hit hardening then black nitride finished for enhanced strength and corrosion resistance. Lightened trigger pull (3.5-lb. pull weight). Lightened hammer...

Interior parts are S7 tool steel with heavy-hit hardening then black nitride finished for enhanced strength and corrosion resistance. Lightened trigger pull (3.5-lb. pull weight). Lightened hammer...

Includes new crush washer.

ARM Brace Tailhook designed for pistols with 1.2"" diameter tube

Assembled Bolt Carrier Group for AR-15/M16. Properly torqued with Grade 8 fasteners. Properly staked to ensure reliability. Machined from solid 4140 bar stock, heat treated and shot peened. O-Ring...

Outside diameter: 1.2''

Midwest Industries Inc Extended Bolt Handle for Ruger PC9 Carbines. (Only compatible with new Ruger PC9 TakeDown 9mm/40 cal carbine models)

Midwest Industries Inc made chassis for the Ruger 10/22 TakeDown. Only compatible with new Ruger 10/22 TakeDown Models.

2.43'' Tall, 2.15'' Wide. 1.3'' Inside Diameter. Fully Dehorned and Deburred.

For AR15/M4/M16 Firearms and other continuous rail platforms. Low Profile design doesn't obscure field of view. Uses standard A2 front sight post. Same height as traditional sights at 45° angle.

100% Made in the U.S.A.

D-Ring Heavy Duty Flush Swivel. 100% made in U.S.A.

3.5lb Single-stage trigger system. Allows you shoot more accurately with less effort. Ultra-smooth break with a crisp, clean release. Fits small pin size (.154). Quick reset and low overtravel for...

Made 100 percent in the U.S.A. of 6061 aluminum, hard coat anodized for a lifetime of service. The highest quality, most affordable AK handguard on the market!

Rail height model is for mounting on gas blocks or handguards that are the same height as the upper. Rail mount model folds to rear.

In most circumstances you will be able to use standard heat shields after installation. Will NOT fit GEN2 SS Handguards, M-Lok Handguards, Keymod Handguards.

In most circumstances you will be able to use standard heat shields after installation. WILL NOT FIT GEN2 SS HANDGUARDS.

Front Sling Adapter. Weight .9oz

Sling Adapter - With Stud

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Torque cross bolts to 45 INCH/pounds Torque ring cap screws to 25 INCH/pounds

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Includes all mounting hardware.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

End Plate Adaptor - Loop - Steel

Heavy Duty QD Sling Adaptor

Heavy Duty Sling Swivel

Features a forward-mounted sling swivel for the use of conventional hunting slings. Includes one 5-slot M-LOK rail section. Slim and lightweight for enhanced feel. Ultra-rigid design that provides...

Features a forward-mounted sling swivel for the use of conventional hunting slings. Includes one 5-slot M-LOK rail section. Slim and lightweight for enhanced feel. Ultra-rigid design that provides...

Features a forward-mounted sling swivel for the use of conventional hunting slings. Includes one 5-slot M-LOK rail section. Slim and lightweight for enhanced feel. Ultra-rigid design that provides...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Henry Accessory Rail - Large Caliber

Henry Accessory Rail - Pistol Caliber

This durable handguard is compatible with Model X Rifles and features a screw-in front sight, heavy-duty ghost ring for quick target acquisition, and a wide windage and elevation adjustment range for...

Constructed from Hard Coat Anodized 6061 Aluminum for a lifetime of service.

Constructed from Hard Coat Anodized 6061 Aluminum for a lifetime of service.

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture...

One five slot M-LOK compatible rail included. Features two anti-rotation QD sling swivel sockets. Constructed of 6061 aluminum, hard coat anodized for a lifetime of service. 100% Made in the U.S.A.,...

One five slot M-LOK compatible rail included. Features four anti-rotation QD sling swivel sockets. Constructed of 6061 aluminum, hard coat anodized for a lifetime of service. 100% Made in the U.S.A.,...

Includes new crush washer. 5/8-24 threads. .410'' diameter hole.

Includes new crush washer. 11/16x24 threads. .500'' diameter hole.

Includes new crush washer. 5/8-24 threads. .500'' diameter hole.

Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service. #MI-LFFG for use with 1/4'' lower than receiver rail height picatinny gas block.