Optic Specific Mounts

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

The Holosun HE509T with its titanium housing, Multi-Reticle System and Solar Failsafe charging system has become very popular with shotgun shooters. Mounting red dot reflex optics, like the Holosun,...

Designed exclusively for the Aimpoint(R) Comp. ML 1" ML 2 and ML 3 sights. Low standard height allows perfect Red Dot co-witnessing on M16/M4 with A.R.M.S.(R) #38(TM) Swan Sleeves and S.I.R.(R)...

The AD-AEMS mount is designed as a QD replacement mount for the Holosun AEMS Red Dot. Available in absolute co-witness, lower 1/3 co-witness, 1.93" and 2.33" NV heights. The Holosun AEMS Low Mount is...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

The FAST MRDS mount, in conjunction with the Optic Adapter Plates in the FAST Modular Accessory Suite, brings compatible micro red dot sights to the established FAST height of 2.26" to optical...

The FAST AEMS positions Holosun AEMS optics at a 2.26" optical centerline from the rail. It comes standard with a two cross bolt rail clamp, but is compatible with the FAST QD (Quick Detach) Lever...

The 34mm ROF-SAR is a drop-in upgrade for 34mm optics. It adds a mounting point for an AIMPOINT Micro (T1-T2-CompM5 and other optics utilizing the same mounting interface) to provide a quick...

In 2012, RS Regulate began rolling out the first models of the AK-300 Modular Side Mount System, which now features six fully modular uppers and nine different lowers: a front-biased, a rear-biased,...

The Revolver Optic Conversion (R.O.C.) allows for the process of modifying a revolver to accept a red dot sight (RDS). Traditionally, revolvers have been equipped with iron sights, but the trend in...

The Revolver Optic Conversion (R.O.C.) allows for the process of modifying a revolver to accept a red dot sight (RDS). Traditionally, revolvers have been equipped with iron sights, but the trend in...

The Reptilia ROF-SAR is a drop-in upgrade for magnified scopes with an objective diameter of 1.3 inches (33mm) or less. Available initially to fit 30mm scope tubes, it adds a mounting point for a...

In 2012, RS Regulate began rolling out the first models of the AK-300 Modular Side Mount System, which now features six fully modular uppers and nine different lowers: a front-biased, a rear-biased,...

The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational...

The FAST MRDS mount, in conjunction with the Optic Adapter Plates in the FAST Modular Accessory Suite, brings compatible micro red dot sights to the established FAST height of 2.26" to optical...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.05" optical centerline height provides faster/easier reticle...

In 2012, RS Regulate began rolling out the first models of the AK-300 Modular Side Mount System, which now features six fully modular uppers and nine different lowers: a front-biased, a rear-biased,...

The Trijicon RMRcc Footprint Quick Release 45 Degree Offset Mount with Trijicon Q-LOC Technology features a 6061-T6 aluminum design, with an easy to use one handed tool less mounting system. Designed...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle...

The 34mm ROF-SAR is a drop-in upgrade for 34mm optics. The ROF-SAR adds a mounting point for a TRIJICON RMR & SRO to provide for a quick transition to a non-magnified optic for close-range target...

The Reptilia ROF SAR is a drop-in upgrade for magnified scopes with an objective diameter of 1.3 inches or less. Available initially to fit 30mm scope tubes, it adds a mounting point for a Trijicon...

The 30mm ROF-SAR is a drop-in upgrade for 30mm optics. The ROF-SAR adds a mounting point for an AIMPOINT Micro (T1-T2-CompM5) to provide for quick transition to a non-magnified optic for close-range...

In 2012, RS Regulate began rolling out the first models of the AK-300 Modular Side Mount System, which now features six fully modular uppers and nine different lowers: a front-biased, a rear-biased,...

Lerna is the first optic mount designed for end-users that offers a 2.91" Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, i.e.. EarPro/Comms headsets, Gas masks/...

Lerna is the first optic mount designed for end-users that offers a 2.91" Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, i.e.. EarPro/Comms headsets, Gas masks/...

Lerna is the first optic mount designed for end-users that offers a 2.91" Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, i.e.. EarPro/Comms headsets, Gas masks/...

The C1 T2 RDM is the next generation of Aimpoint mounts. This is a super rugged mount with a minimal foot print, solid mounting system and elegant C1 styling. Allows the use of any C1 J-arm socket...

Th Condition One Aimpoint 12 O'Clock Top Optical Plate allows a user to direct mount any optic with an Aimpoint Micro footprint directly to the 12 O'Clock position on a standard C1 mount. The...

Due to popular demand the #16A Aimpoint Carry Handle Mount is back in production. The #16 is coupled with the classic #22M68 saddle to allow 30mm Aimpoint style optics to be mounted directly to A1/A2...

The Patented Arisaka Aimpoint Micro Mount Mk2 is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the Aimpoint H1/H2,...

The Sidelok is a revolutionary new mounting system for optics. The patented cam system locks the mount down onto picatinny without the need of tools, side levers, or huge knobs. The release system...

Mounting red dot optics, like the Aimpoint red dots on shotguns, has become super popular. The GG&G 1301 Optic Rail For Aimpoint Scopes is available with your choice of a full or half ghost ring for...

With the development of their Accucam Quick Detach Locking Lever System, GG&G is now able to manufacture a full line of QD mounts that allow the primary optic to be attached and detached from the...

Lerna is the first optic mount designed for end-users that offers a 2.91" Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, i.e.. EarPro/Comms headsets, Gas masks/...

Lerna is the first optic mount designed for end-users that offers a 2.91" Optic Centerline for faster target ID, regardless of gear/ equipment obstructions, i.e.. EarPro/Comms headsets, Gas masks/...

Th Condition One Aimpoint 12 O'Clock Top Optical Plate allows a user to direct mount any optic with an Aimpoint Micro footprint directly to the 12 O'Clock position on a standard C1 mount. The...

B&T USA, NAR Universal Mount, Fits MP5/G3/HK53, Anodized Finish, Black

The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka...

This is a longer version of the widely used #02 carry handle mount. It measures 6.5" long and attaches via a unique self-locking thumbnut that fits snugly in the hole in the carry handle for...

The AD-509T QD mount was developed for the Holosun 509T red dot for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-509T QD mount is a one piece...

The Reptilia ROF SAR is a drop-in upgrade for magnified scopes with an objective diameter of 1.3 inches or less. Available initially to fit 30mm scope tubes, it adds a mounting point for a Trijicon...

A.R.M.S.(R) #31(TM) Aimpoint Micro Mount. Throw Lever(R) Mount for the Aimpoint T-1 Micro sight.Features :Made in the USA

The FAST Micro-SB is specifically designed for the Aimpoint CompM5s, CompM5b and Duty RDS mini red dot sights and features a built-in, fully adjustable front and rear back-up iron sight. The built-in...

The FAST Micro-SB is specifically designed for the Aimpoint CompM5s, CompM5b and Duty RDS mini red dot sights and features a built-in, fully adjustable front and rear back-up iron sight. The built-in...

Th Condition One Aimpoint 12 O'Clock Top Optical Plate allows a user to direct mount any optic with an Aimpoint Micro footprint directly to the 12 O'Clock position on a standard C1 mount. The...

The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka...

The ARMASPEC ELEV8 Series High Rise Optic Risers offer a precise and secure solution for elevating red dot optics with a T1/2 footprint, These risers maintain a low-profile and sleek appearance,...

The AD-AEMS mount is designed as a QD replacement mount for the Holosun AEMS Red Dot. The mount is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize and features...

The #19(TM)LD ACOG(R) MK-II Dual Lever Mount raises the ACOG(R) by only 3/16" off the top of your rail. The mount is approx. 3 3/4" long to use up as little rail space as possible. The new MK-II...

The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka...

The Patented Arisaka Aimpoint Micro Mount Mk2 is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the Aimpoint H1/H2,...

The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit...

The AD-AEMS mount is designed as a QD replacement mount for the Holosun AEMS Red Dot. The mount is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize and features...

The AD-MRO lightweight mount is designed for the Trijicon Miniature Rifle Optic. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational...

The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka...

The Patented Arisaka Aimpoint Micro Mount Mk2 is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the Aimpoint H1/H2,...

The AD-MRO lightweight mount is designed for the Trijicon Miniature Rifle Optic. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational...

The AD-AEMS mount is designed as a QD replacement mount for the Holosun AEMS Red Dot. Available in absolute co-witness, lower 1/3 co-witness, 1.93" and 2.33" NV heights. The Holosun AEMS Low Mount is...

The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit...

The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational...