PRO-LOK Tools

The hardened steel bushing plate used for locks requiring a 1-1/2? cross bore.

The 15 piece Premium Car Opening Kit is an excellent tool for those wish to invest in a high quality lockout kit. This set of Premium tools assures that you will not only receive 13 of our best...

The 18 Piece Ultra Combo Car Opening Kit is a mix of the most popular traditional car opening tools snugly fit into the lid of the case as well as our assortment of 5 Quick Change” Long Reach Tools...

The hardened steel bushing plate used for locks requiring a 2-1 /8? cross bore.

The 3 Piece Quick Change Long Reach Tool is designed to unlock many vehicles through the passenger door using wedges and/or door jack type tools. Features a specialty formulated Glow-in-the-Dark tip...

A 3v replacement bright broad spectrum bulb used with the AL10500 2 Cell Krypton HardBody Light. Emits pure white light.

Keep a Complete Tool Kit on hand at all times. This 47 Piece Complete Car Opening Kit contains 5 Slim Jim Tools, 7 Multi-Car Opening [MCOT] Tools, long reach tool and all of our specialty tools along...

PRO-LOK uses the newest high technology steels and construction methods. Each of their superior quality lock picking tools are made from tempered stainless steel, deburred and burnished to a soft...

designed to enter into the passenger compartment of the vehicle through the door using wedges and/or door jack type tools. The soft vinyl tip allows for easy manipulation of the interior lock...

The Large Vinyl Storage Case features a zip-lock style closure to keep tools secure. Size 8” x 27” in.

The 9 Piece Professional Car Opening Kit is a perfect solution if you are outfitting a van, need a spare kit for the shop, or if you’re just getting started in the auto lockout business. The low cost...

The 7-Pin Ace Pick is a precision tool designed to easily open any standard 7-pin center type lock. Set tension, insert, and rotate back and forth until the cylinder turns. Simple to use and comes...

ASSA Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for ASSA keys.

The Astro Tool is an extremely useful, double ended car opening tool with a hook and reach designed to open the Chevy Astro or Safari Van and several other GM cars. Full Color Instructions included.

The Audi A6/A8 Tool is a double sided car opening tool with modified L” end used to open an Audi A6 (or some Pontiacs) while the U” end is used to open the Audi A8.

double sided Back-Flip Car Opening Tool is designed to reach above and behind the plastic guard plates on foreign and domestic vehicles.

The Picking Basis Booklet is ideal for the beginner locksmith. The 40 page paperback booklet is fully illustrated for ease of comprehension. Includes 3 picks and 1 tension wrench.

The versatile, double ended Behind the Glass Car Opening Tool is designed to gain vehicle access to horizontal linkage located above and behind the glass.

pliable and durable Black Key Hook with unique no-spill hook design securely holds 25-30 blanks in place until deliberately removed. Made from a specially formulated material to prevent drooping or...

Take your Blue Punch machine with you anywhere with this specialty constructed Blue Punch case. Designed from rugged hard plastic, the case features a sturdy handle for easy transportation, a...

The Button Finger Multi-Car Opening Tool (MCOT) is modified to operate the vertical buttons on various foreign and domestic vehicles. Remove the protective cap to use the precision ground tip.

The Button Lifter Multi-Car Opening Tool (MCOT) is designed to reach under windows to unlock vehicles with raised vertical buttons. Simply remove the protective cap and use the precision ground tip.

The versatile Camry/Lexus Car Opening Tool has a double sided design for opening Toyota Camry and the rear door of the Lexus LS 400 sedans.

Take your killer jigs, bits and other tools with you anywhere in this specialty constructed Heavy Duty Carrying Case. Designed from rugged hard plastic, the case features a heavy duty custom...

The Chrysler Car Opening Tool enters the lock just like a key, works on all Chrysler/Dodge with a cylinder drain hole. Full Color Instructions included.

CLAMP ON SLIM JIM

The Cruiser/Kompressor Car Opening Tool features a tip with two sides. The short end opens Land Cruisers and Lexus LX450. The long end opens the Mercedes SLK 230 Kompressor.

The Deluxe Zippered Case is made from heavy duty cordura, featuring sturdy handles, four (4) storage compartments, and a full length zipper. The center panel divider keeps wire tools in place with a...

The double sided Door Gapper Dual Tool makes Auto Entry easy!  This tools features a Traditional Wedge on one end and a Door Gap Tool on the other.  Use the rubber pivot to provide leverage in...

The versatile Double L” Car Opening Tool is designed to open GM Dustbuster” minivans including: the Oldsmobile Silhouette, Chevy Venture, Pontiac Montana, and more.

The Red Double-Sided Wedge is made of high impact plastic to assist in expanding car openings in order to unlock vehicles. The varying height design on each side (1/2? and 3/4?) allows technician to...

The Double Slide Tool is a multi-functional tool with a short reach for narrow doors and a reverse tip for reaching under horizontal linkage.

The versatile Dual Tool is actually two (2) tools in one. The each side of the double ended tool is capable of unlocking many types of foreign and domestic vehicles.

A group of professional locksmiths worked together to write E-Z Picking, combining decades of real-world experience to create an easy-to-understand training guide. Full-color cut-away illustrations...

The Euro Strip Tool has a flexible design which allows technicians to bypass doors on foreign and domestic vehicles. Machine cutout with a heavy duty rubber band for extra strength.

The 4 Piece Extra Long Arm Car Opening Tool Kit is ideal for reaching across the vehicle’s interior to depress the unlock button, access the pull handle, lift the lock button, or retrieve the keys;...

The E-Z Jim is a medium thickness Slim Jim designed to unlock a wide variety of foreign and domestic vehicles. Made of stainless steel. 1” x 25” x .042” thick.

The Fat Multi-Car Opening Tool (MCOT) is designed to bypass window regulators that run the length of the window glass, inhibiting the entry of the original type M.C.O.T. tools.

The Flat Door Panel Tool is a spatula” style door clip remover. The tool slips around the base of the door clip, between the car door panel and the steel door, to allow you to carefully pry the door...

The GM Camaro Car Opening Tool is specially designed to unlock most Chevrolet models, including the Camaro, but also works on some Pontiac, Saab, and Toyota vehicles.

The versatile GM L” Car Opening Tool allows technicians to lift and push bell cranks on many GM model vehicles.

The versatile GM S-10 Car Opening Tool is designed to unlock 1980 – 1989 model GM trucks, such as the S-10 Blazer and GMC Jimmy, as well as vent windows.

The M.C.O.T. Handle Opener Tool is designed to access and manipulate closed pull handles on vehicles that have stiff handle springs or which require higher pull strength than traditional M.C.O.T...

The Handle Pull Multi-Car Opening Tool (MCOT) is designed to access and manipulate pull handles on vehicles that have stiffer handle springs such as certain BMW, Mercedes and Land Rovers.

HARDBODY LIGHT 2-CELL 3V

The Grey Rubber Wedge is made from heavy-duty, non-marking high grade rubber to assist in expanding openings in order to unlock vehicles.

The Honda Tool (Double Ended Hook and Lift Tool) is designed to make opening foreign and domestic vehicles with a horizontal or vertical linkage super easy.

The IC/A2 Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for Best/Falcon & other I/C keys using standard A2 increments.

The Heavy-Duty Auger 1? Bit made of manufactured steel will cut quickly with minimal friction heat so your tools last longer. Designed to bore the edge hole for most deadbolt locks and latches on...

The 1-1/8? x 2-1/4? in. Heavy Duty Deadbolt Marker is used for marking the wood door when mortising many commercial deadbolt and latch face plates.

The 1? x 2-1/4? in. Heavy Duty Latch Marker is used for marking the wood door when mortising many standard deadbolt and latch face plates.

The 1-3/4? x 2-1/4? in. Heavy Duty Lip Strike Marker is used for marking the wood door when mortising many standard deadbolt-latch strike plates.

The Heavy-Duty 1-1/2? Multi-Spur Bit made of manufactured steel will cut quickly with minimal friction heat so your tools last longer. Designed for use on locks requiring 1-1/2‘ cross bore on wood...

The Heavy-Duty 2-1/8? Multi-Spur Bit made of manufactured steel will cut quickly with minimal friction heat so your tools last longer. Designed for use on locks requiring 2-1/8? cross bore on wood...

The Strike Locator is used to mark a door jamb for proper installation. After a 1” in. edge bore is drilled, insert the Strike Locator, close the door, put pressure on the punch and the sharp center...

The 1-1/8? x 2-3/4? in. Heavy Duty Strike Plate Marker is used for marking the wood frame when mortising many standard deadbolt strike plates.

The GM, Chry, Ford & 10cut Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for GM, Ford, Chrysler and Ford 10-cut keys.

The KW1,SC1,WK1,WE1 Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for Kwikset, Schlage, Weiser, Weslok keys.

The Med, Master & AmPad Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for Medeco small pin, Medeco large pin, Master Padlok, American Padlock keys.

The Killer Jig is a specially designed, professional quality jig made from lightweight machined aluminum with hardened bushings, a durable powder coated finish and easy to change backsets...

The Killer Jig Kit includes everything a professional installer needs to prepare doors and door jambs for hardware. Everything is stored in a heavy duty case with custom Polyurafoam interior to hold...

In the auto opening business, you have to keep up with the many changes manufacturers make to vehicles. This 33 Piece Late Model Car Opening Kit contains of the tools used to unlock late model...

The 4.5v switchless Hardbody Light with aluminum body and flexible wand allows you to reach those hard to see places. Powered by three (3) AA batteries. Includes suction cup clip, hard shell case and...

Long Multi-Car Opening Tool is designed to stretch under the window of a variety of vehicle types for hard to reach activators.

The Long Reach Accessory Tool is ideal for reaching inside pull handles which are located in recessed, tight places. This tool can be used as stand alone tool or used to extend the reach of the AO42...

The Long Reach Car Opening Tool allows technician to reach inside the vehicle compartment to either manipulate locking devices inside the vehicle or to retrieve the keys. The multiple piece Long...

Use the Long Reach Tool Sleeve to protect the glass, weather stripping, paint, and edge of the door from tools while performing an auto opening.

The unique double ended Loop D-Loop Car Opening Tool offers a new approach to lockouts on foreign and domestic vehicles. Fed in under the window, the ‘loop’ is fixed around the straight or mushroom...

The Economy Kit is a great starter kit or inexpensive way to accumulate additional spare tools. The compact slim vinyl case allows for easy storage behind the seat for those emergency calls. Includes...

The 13 Piece Mega Long Reach Car Opening Tool Kit is the newest car opening kit from Pro-Lok. The kit includes everything one may need for gaining entry into an auto. From a variety of car opening...

The Mini Rubber Wedge is a versatile tool made from heavy-duty grade, non-marking rubber. Perfect for expanding openings to unlock vehicles without damaging car doors and windows.

The Mini Duo Orange Wedge with a unique crown makes expanding even tight doors easy. A set of two (2) wedges are easily inserted to assist in expanding openings to better maneuver car opening tools.

Pro-Lok AO57 Black Molded Case For Akuc/Akul Car Opening Tools.

The Narrow tool is the 'original' Multi-Car Opening Tool (MCOT), designed to go under the window and inside the car to unlock the door.

The 20 Piece Padlock Shim Pick Set is designed for use on both combination and key operated padlocks with spring operated shackle latches. Simply insert the shim next to the lock shank and then...

The Porsche 928 Car Opening Tool is ideal for opening a Porsche 928 on the driver’s door quickly and professionally.

This versatile 11 Piece Pick Set includes: 3 picks with stainless steel handles, 3 standard picks, a double ended slim line pick, broken key extractor and 3 tension wenches in a soft luggage quality...

14 Piece Pick Set includes: 9 picks and a broken key extractor, all manufactured of tempered stainless steel and all with rivetless stainless steel handles, 4 tension wrenches in a soft luggage...

The 20 Piece Pick Set includes: 14 assorted picks (6 with rivetless stainless steel handles), a broken key extractor and 5 tension wrenches in a soft luggage quality zipper leather case. We use the...

This large 32 Piece Pick Set includes: a variety of tempered stainless steel hooks, rakes, balls, diamonds, key extractors, and tension wrenches in a soft luggage quality zippered leather case. We...

The 4 Piece Long Arm Car Opening Tool Kit is ideal for depressing the unlock button, accessing the pull handle, lifting the lock button, or retrieving the keys; all as if you were sitting inside the...

The Manual Pick Gun is the best pick gun available for opening various pin tumbler locks. The slim needle is inserted into a keyway, the first squeeze of the trigger drops the needle, then a second...

The 13 Piece Master Car Opening Kit is designed to provide the professional technician with a general use lock-out kit. The kit contains an assortment of basic tools that can be used to unlock a...

Replacement picks for Manual (PKXGUN-M) or Electric (PKXGUN-E) Pick Guns.

The 6 Piece Slim Jim Kit is an invaluable asset for any lockout technician and perfect for the Slim Jim lover. This kit gives you the choice of 5 different styles of Slim Jims. Whether you need long...

The Original Slim Jim is still the best for opening cars. The Slim Jim design unlocks a variety of foreign and domestic vehicles. Made of stainless steel. ¾ x 22½ x .032 thick. Full Color...

The Super Slim Jim is wider and thicker than the Original Slim Jim. Designed to unlock many foreign and domestic vehicles. Made of stainless steel. 1¼ x 25 x .032 thick.

The 13 Piece Long Reach Car Opening Kit includes an assortment of 5 Quick Change” Long Reach Auto Entry Tools and accessories custom fit into the bottom of the specialty molded case. Simply choose...

The Pump Wedge is a unique and versatile tool for expanding openings to unlock vehicles. The inflatable wedge made of non-marring ballistic material and has rounded corners for easy entry.  Includes...

The Wedge Starter & Window Protector is used with the AO65 Pump Wedge for easier insertion of a wedge and to protect the window glass from scratches.

QUICK CHANGE ADAPTER

The 2 Piece Quick Change Long Reach Accessory Tools features a thin diameter body which screw directly into the ‘handle’ or 18” in. extension arm without the use of a bulky coupler. The thinner...

REPLACEMENT BINDER

The Round Jim is specially designed to unlock vehicles with exposed bellcranks, such as the Volvo 960, S90/V90 or the Porsche Boxter/911.

The SC1 Key Decoder with Sure Stop” steps simplifies the decoding, re-keying and code cutting process for all Schlage & other (Schlage type) keys using factory increments.

The Separator Multi-Car Opening Tool (MCOT) with precision ground tip may be used to access a variety of vehicles where the inner panel deflector inhibits entry or weather stripping is tight.

The Slide Jim Car Opening Tool is a double ended tool, designed to unlock many cars with exposed horizontal lock linkages. The L” end is used to manipulate bell cranks while the U” end is used to...

The Slide Lock tool opens foreign and domestic vehicles with both horizontal locking devices and vertical buttons. Full Color Instructions included.

The Spring L” Tool is one of the most versatile car opening tools. Allows technician to lift and push bell cranks on many car models.