Rails, Rings, Mounts, Bases

Ruger Model Specific fit Sold in pairs, Maxima Ruger rings are packaged in model specific configurations tofit Ruger's proprietary dovetail Warne's Maxima Maxima rings are a solid steel, vertically split ring that handle even the most punishing recoil,...

Count on 34mm low scope rings from Warne Scope Mounts to give you excellent sighting through a scope. Using a scope requires careful installation and sighting: The goal is to have the lines from the scope and barrel be as close and as parallel as...

Pistol Scope Rail, Black Poly, M

1 inch ring that mounts to weaver/Picatinny rails.

Shotgun Magazine Tube Extension Clamp which does not feature a side picatinny rail. This extension clamp is designed to work in conjunction with Lancer Shotgun Magazine tube extensions and it features a matte black finish.

100% Made in the U.S.A.

Warne 1 inch Tikka, QD, Med Matte Rings

100% Made in the U.S.A.

CZ Direct fit upgrade Designed to fit the 19mm 550/557 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

This steel shroud helps protect your ROMEOZero red dot sight from impact and abrasive damage.

Ambidextrous Picatinny attachment. Reversible light mount to ensure snug fit and modularity. Constructed of Hard Coat Anodized 6061 Aluminum.

Battery cap for AccuPower RS20/RS22/RS24/RS29 models.

The Steiner 772 is a device that allows binoculars with a 1/4-20 threaded tripod socket to be attached to a tripod. Features a video pin to register more securely with many popular tripod quick release plates.

Acting as an alternative to the Model 17S mount, the Steiner HT Mount, available here with the lever on the left side, features a throw lever-style quick release and is able to attach to Picatinny/Weaver rails. NSN #5855-01-614-32

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

For rock-steady viewing from your vehicle, use the window mount with nearly any spotting scope.

Two-piece 1913 Picatinny steel rail for Savage Accu Trigger.

RMR type optic base mount for Glock rear sight dovetails.

CZ Direct fit upgrade Designed to fit the 16mm 527 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

Precision machined for optimum performance and repeatability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Picatinny Adapter to Mepro QD adapter for red dot micro sight to rapidly switch your red-dot from your pistol to your conversion kit - on any other standard Picatinny rail.

New Hunter Series of Scope Rings, 30MM Scope Tube Diameter Ring with 1'' Scope Ring Inserts.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

GEN II 30mm cantilever scope mount with lightweight upper rings and 45 offset rail. Includes 1'' scope inserts.

NEW and Improved Gen2 3/4'' Picatinny Rail Riser 5.2'' Length is Picatinny / MIL-STD 1913 Standard profile and is lighter than the previous generation.

Key-Mod 1'' Flashlight/ Laser Extended Modular Ring Mount.

The HFM-10 Picatinny Rail Mount Adapter from SureFire adapts the HF1/HF4 HellFighter-series illumination device T-slot mount to fit Mil-Std 1913 Picatinny rails.

M-LOK 1'' Flashlight/ Laser Extended Modular Ring Mount.

Henry Accessory Rail - Pistol Caliber

Leupold Quick Release steel bases you can mount a scope, zero it, remove it, reattach it and remain nearly dead-on with your original point of impact. The key is precise machining of the patented lever mechanism. Turning the lever forward engages the...

Rail mount for M4/M16/AR15 with flat top upper receivers. Side rails allows user to mount lights/ lasers or other accessories.

Tenebraex killFLASH anti-reflection device and Tenebraex flip cap set for 1-6x24 VCOG.

This quick release flatop mount clamps onto Weaver rails. Fits the 1.5x16S (M16 base), 1.5x24, 2x20, 3x24 and 3x30 ACOG models - Gen 2 only.

Constructed from hard coat anodized 6061 aluminum. Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking.

30mm Flip to Side Quick Release Mount

Leupolds Carbon Fiber Tripods deliver maximum versatility and performance to hunters and shooters alike, with a rugged, lightweight design thats ready to go anywhere. The Mark 5 is built to mount to a rifle, and is perfect for competition shooters and...

Remington 870/1100/11-87 Barrel and Magazine Tube Micro-Dot and Rail Mount, for mounting Optics and Accessories to your shotgun.

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD...

The C&H Precision plates are precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping. Since all the mounting hardware is replaceable, if any mounting hardware is damaged, it...

100% Made in the U.S.A.

Rail Cover, Ladder, Low Profil

Carbon fiber construction makes this full-size tripod incredibly durable, yet lightweight at just 2.5 pounds. With a max height of 58.25 inches, it folds to just 22.75 inches. The pan/tilt head's smooth tracking is perfect scanning or following movement.

7mm riser plate with mount screws for EOTECH Gen 2 and Gen 3 magnifiers only. Does not fit Holographic Weapon Sights. This is a direct factory replacement accessory for G23 and G33 magnifier products.

New updated Gen2 Picatinny scope rail mount designed to fit onto most Marlin Lever action rifles and some Marlin semi-auto rifles. Mounts easily onto predrilled Marlin receivers and allows for the easy mounting of optics onto your rifle.

GEN 2 Picatinny Rail Mount for HK MP5/ CETME/ 90 Series of long guns.

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture and front sight post.

Feature the patented Elite Defense QD system for no tool adjustment and repeat zero locking. Rail measures 6.75'' long, weight 7.3 oz.

TRG scope mount, 34mm Diameter, Medium Height, 36/37mm, Phosphate finishing. Base with 0.5-degree/30 MOA forward angle increases maximum scope elevation for long range shooting.

The C&H Precision plates are precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping. Since all the mounting hardware is replaceable, if any mounting hardware is damaged, it...

NcSTAR Low profile Micro Dot base mount for the Ruger MK2 pistol with factory predrilled receiver. The easiest method to adding a Micro Dot optic to your MK2 pistol. The Micro Dot base mounts in front of the ejection port and doesn't require the removal...

Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a ''no fail'' shot that will save another human life. Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers...

This picatinny rail accessory kit allows you to add Blackhawk CQC picatinny rail accessories (magazine pouch, light holders) to your CQC SERPA holster leg platform.

1.5 in Picatinny Rail for M-LOK Handguards.

This tripod, made with a titanium finish, features three-position leg angle adjustment, a three-way pan head, two pan and tilt handles, and a gearless reversible center column.

7'' full 1913 Picatinny steel rail for Savage Accu Trigger short action.

This quick release flatop mount clamps onto Weaver rails. Fits the 1.5x16S (M16 base), 1.5x24, 2x20, 3x24 and 3x30 ACOG models - Gen 2 only.

Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a ''no fail'' shot that will save another human life. Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers...

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Low Profile AK Picatinny rail mount receiver cover. Great for mounting an optic onto your AK.

Rail adapter for 1911 government frame pistols. Attaches to trigger guard to allow mounting of accessories such as lights or lasers.

The QR mounts allow you to remove and reattach your scope and return to within 1/2'' of the original point-of-impact. The patented lever mechanism, machined with precision tolerances, engages the steel base to the ring, pulling it down and forward and...

AK tri-rail which replaces factory dust cover and allows mounting of optics. Side rails allow accessories such as lights and lasers. Center cutout allows user to still use iron sights.

The Leupold steel standard bases and rings are the most versatile of any mounting system offered. The rear ring is secured by windage adjustment screws, allowing the scope's internal adjustments to be reserved for precise sight-in. Additionally, shims...

This package contains one optic base adapter interface for non-optic ready pistols.

Ruger Model Specific fit Sold in pairs, Maxima Ruger rings are packaged in model specific configurations to fit Ruger's proprietary dovetail Warne's Maxima Maxima rings are a solid steel, vertically split ring that handle even the most punishing recoil,...

New Hunter Series of Scope Rings, 1'' Scope Tube Diameter Ring.

CZ Direct fit upgrade Designed to fit the 16mm 527 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

CZ Direct fit upgrade Designed to fit the 19mm 550/557 integral dovetails, Warne's Maxima CZ rings are a solid steel, vertically split ring that handle even the most punishing recoil, or large, heavy scopes. Since each firearm manufacturer has their own...

Kalashnikov USA is proud to introduce our long awaited Eastern Bloc inspired K-21 M-LOK rail.

1 inch ring that mounts to weaver/Picatinny rails.

This Innovative 45-degree mount attaches a dot optic to your picatinny rail. It utilizes a modified MOS footprint and requires the use of a C&H MOS adapter plate.

RMR/SRO mount for Blaser custom rifle.

M16/AR15 front sight adjustment tool.

1'' Shotgun Magazine Tube Mount with Picatinny Rails, Sling Stud, & Bayonet Lug for the Remington 870 12 gauge shotgun. Fits most Home Defense/ Police models with the factory Remington extended capacity 12G. magazine tubes with the reduced diameter front...

Adjustable Height 30mm Optic Ring with 1'' ring insert

This caps and lanyard set for the ACOG is designed to fit those ACOG's that have an external adjuster. This adjuster has a higher profile than the internal adjuster. The dial is black in color and is adjusted by finger touch.

12 Gauge Extended Magazine Tube Tactical Mount for use with tactical weapon lights

Sunshade for 5-20x50 AccuPoint.

Cantilever ring mount designed for 30mm optics while pressing the optic forward to allow more room for other accessories.

Mossberg 500/590 Shotgun Barrel and Magazine Tube Micro-Dot and Rail Mount, for mounting Optics and Accessories to your shotgun.

M-LOK & KEYMOD Short length PICATINNY (3 Slot) accessory rail, mounts onto M-LOK & KEYMOD Spec. handguards.

Warne 1 inch CZ, QD, Med Matte Rings

Over Built for the task! The Warne Rimfire rings were created to fits both the 3/8th inch and 11mm dovetails found on many common rimfire rifles. Featuring a unique 70/30 horizontal split design, these steel rimfire rings are the best available.

Tenebraex flip cap set for 1-6x24 VCOG.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.

New Tactical Series of Scope Rings, 30MM Scope Tube Diameter Ring with 1'' Scope Ring Inserts.

Stowage Mount Unbrimmed

Key-Mod 1'' Flashlight/ Laser Extended Ring Mount.

CTS-1400 LOWER 1/3 CO-WITNESS MOUNT

Fully adjustable with no tools required, can be adjusted to fit rails not machined to mil-spec tolerances. Extremely smooth in operation with multifaceted adjustment nut to get the exact tension required by the operator.

Med 1.13'' mount for attaching Trijicon compact ACOG gunsight to weapon.

Wide windage and elevation adjustment range for use with different ammunition. Midwest Industries sight adjustment tool included. Constructed from Hardcoat Anodized 6061 Aluminum. Steel rear aperture and front sight post.

This HT Mount Quick Release from Steiner attaches to the SPIR Special Purpose IR LED Illuminator and allows it to easily attach to any Picatinny/Weaver mount. It features a lever-action quick release for mounting and removal of the SPIR when not in use.

Warne 1 inch Ruger, QD, Med Matte Rings

Extremely rugged, precision aligned digi-scoping adapter kit featuring a patented mono-lever locking mounting collar. Designed exclusively for the iPhone 6 model. Easy installation, auto-aligning design.

Precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 aluminum for a lifetime of service. Patented QD lever by Elite Defense.